|
|
 |
|
|
Items in your cart
Empty
|
Carolina Shooters Supply
P.O.Box 1284
Murrells Inlet SC 29576
OFFICE 843-267-9084
9am-4pm EST Monday-Thursday |
|
|
|
|
|
AKDAL MKA 1919 TROMIX SHARK BRAKE
SKU: TRX-MKA SHARK
Tromix Shark brake for you Akdal shotgun.
Made in the USA and counts for 1 US part.
Attaches to the outside of you barrel to reduce felt recoil.
Allows the use of factory chokes to still be used and changed with the Tromix extended choke tube wrench.(Sold Separately)
1. Make sure your gun is unloaded.
2. Slide brake over barrel until it bottoms out and apply a piece of tape around the barrel at the base of the brake.
3. Rough up the end of the barrel above the tape line with 80 grit sand paper.
4. Apply loctite #620 bearing mount to the inside of the brake and to the barrel above the tape line.
5. Slide the brake in position and make sure to “clock” the two round holes upward.
6. Allow to dry for 20 minutes.
7. Reach through the brake with a Tromix extended choke tube wrench and remove the choke.
8. Run a cleaning patch down the barrel and out the muzzle to clean out any excess loctite.
9. Allow to dry 24 hours and be sure to reinstall the choke before firing.
TROMIX
| PRICE: |
$85.00 |
IN STOCK AVAILABLE FOR PURCHASE
-Please select quantity for purchase
|
|
